Angebote zu "Turning" (93 Treffer)

Kategorien

Shops

Multi-response Optimization for CNC Turning Pro...
39,90 € *
ggf. zzgl. Versand

This book is related to the multi-response optimization of the CNC turning operation.In present research work, the effect of insert nose radius and machining parameters including cutting speed, feed rate and depth of cut on surface roughness(Ra) and material removal rate(MRR) in a turning of HSS(M2) are investigated using the Taguchi method and ANOVA. A three level, four parameter design of experiment, L9 orthogonal array using Minitab 14 software, the signal-to-noise (S/N) ratio is employed to study the performance characteristics in the turning of HSS(M2) by taking nose radius of Tin coated carbide inserts tool of 0.4, 0.8 and 1.2 mm on CNC turning centre. The analysis of variance (ANOVA) is applied to study the percentage contribution of each machining parameters while CNC turning of HSS (M2) material. All experimental trials are conducted in a dry machining environment and at a constant spindle speed of 2800 rpm. The results are verified by taking confirmation experiments. The present investigation indicates that feed rate and nose radius are the most significant factors in the case of material removal rate and surface roughness.

Anbieter: Dodax
Stand: 27.01.2020
Zum Angebot
CNC Turning of Medium Carbon Steel
35,90 € *
ggf. zzgl. Versand

The objective of this book is to share the experimental investigations to the readers about the effect of controlled cutting parameters namely cutting speed, feed rate, depth of cut, cutting fluid concentration and two cutting fluids with different base oils on surface roughness (Ra) of EN8 or AISI 1040 steel during turning operation by using design of experiments, custom design method, analysis of variance, leverage plots and desirability profiling using JMP software to study the performance characteristics in wet CNC turning operation. The analysis reveals that feed rate has the most significant effect on surface roughness (Ra) and value of surface roughness does not significantly differ for two different cutting fluids used.

Anbieter: Dodax
Stand: 27.01.2020
Zum Angebot
CNC Turning of Medium Carbon Steel
37,00 € *
ggf. zzgl. Versand

The objective of this book is to share the experimental investigations to the readers about the effect of controlled cutting parameters namely cutting speed, feed rate, depth of cut, cutting fluid concentration and two cutting fluids with different base oils on surface roughness (Ra) of EN8 or AISI 1040 steel during turning operation by using design of experiments, custom design method, analysis of variance, leverage plots and desirability profiling using JMP software to study the performance characteristics in wet CNC turning operation. The analysis reveals that feed rate has the most significant effect on surface roughness (Ra) and value of surface roughness does not significantly differ for two different cutting fluids used.

Anbieter: Dodax AT
Stand: 27.01.2020
Zum Angebot
FE Analysis and Optimization of CNC Turning Cen...
41,10 € *
ggf. zzgl. Versand

In machine tool design, to optimize the design finally, analysis becomes powerful tool for designer and thus it is required to analyze the various structures i.e. head, slant bed, column, slides, over arm etc. of machine tool before arriving at final design decision. Again, it is very difficult to analyze the structure analytically and moreover the accurate results for stress, deflection etc. are the limitations of this method. In machine tool, Structure like beds, bases, columns, box-type housing, over arms, carriages and tables are containing major weight. In machine tools 70-80 percentage of the total weight of the machine is due to the structure. The present paper deals with analyze and optimize the head stock and bed of CNC turning Center Q- Plus. Static structural analysis of head stock and bed of CNC turning center is carried out. Based on result of Stress and displacement obtained in static structural analysis optimization of existing structure has been done.

Anbieter: Dodax AT
Stand: 27.01.2020
Zum Angebot
FE Analysis and Optimization of CNC Turning Cen...
39,90 € *
ggf. zzgl. Versand

In machine tool design, to optimize the design finally, analysis becomes powerful tool for designer and thus it is required to analyze the various structures i.e. head, slant bed, column, slides, over arm etc. of machine tool before arriving at final design decision. Again, it is very difficult to analyze the structure analytically and moreover the accurate results for stress, deflection etc. are the limitations of this method. In machine tool, Structure like beds, bases, columns, box-type housing, over arms, carriages and tables are containing major weight. In machine tools 70-80 percentage of the total weight of the machine is due to the structure. The present paper deals with analyze and optimize the head stock and bed of CNC turning Center Q- Plus. Static structural analysis of head stock and bed of CNC turning center is carried out. Based on result of Stress and displacement obtained in static structural analysis optimization of existing structure has been done.

Anbieter: Dodax
Stand: 27.01.2020
Zum Angebot
Task Book - CNC Technology, Turning as per PAL
59,80 € *
ggf. zzgl. Versand

Erscheinungsdatum: 01/2014, Medium: Stück, Einband: Ordner (Kunststoff), Titel: Task Book - CNC Technology, Turning as per PAL, Titelzusatz: 15 Programming Exercises for the PAL Programming System, Verlag: Christiani // Christiani, Paul, Sprache: Englisch, Schlagworte: Maschinenbau // CNC // Berufsbezogenes Schulbuch // für die Berufsbildung // Berufsausbildung // Unterrichtsmaterial, Rubrik: Maschinenbau // Fertigungstechnik, Seiten: 128, Informationen: KUNSTORD, Gewicht: 1170 gr, Verkäufer: averdo

Anbieter: averdo
Stand: 27.01.2020
Zum Angebot
Solution Book for the Task Book - CNC Technolog...
24,20 € *
ggf. zzgl. Versand

Erscheinungsdatum: 01/2014, Medium: Taschenbuch, Einband: Kartoniert / Broschiert, Titel: Solution Book for the Task Book - CNC Technology, Turning as per PAL, Verlag: Christiani // Christiani, Paul, Sprache: Englisch, Schlagworte: Maschinenbau // CNC // Berufsbezogenes Schulbuch // für die Berufsbildung // Berufsausbildung // Unterrichtsmaterial, Rubrik: Maschinenbau // Fertigungstechnik, Seiten: 108, Gewicht: 326 gr, Verkäufer: averdo

Anbieter: averdo
Stand: 27.01.2020
Zum Angebot
Biradar, Shivaji: Optimum Values Of Process Par...
49,00 € *
ggf. zzgl. Versand

Erscheinungsdatum: 01/2013, Medium: Taschenbuch, Einband: Kartoniert / Broschiert, Titel: Optimum Values Of Process Parameters In CNC Turning, Autor: Biradar, Shivaji, Verlag: LAP Lambert Academic Publishing, Sprache: Englisch, Rubrik: Wirtschaft // Wirtschaftsratgeber, Seiten: 76, Informationen: Paperback, Gewicht: 130 gr, Verkäufer: averdo

Anbieter: averdo
Stand: 27.01.2020
Zum Angebot
Optimum Values Of Process Parameters In CNC Tur...
50,40 € *
ggf. zzgl. Versand

Modern manufacturers, seeking to remain competitive in the market, rely on their manufacturing engineers and production personnel to quickly and effectively set up manufacturing process for new products. Taguchi Parameter design is a powerful and efficient method for optimizing quality and performance output of manufacturing processes, thus a powerful tool for meeting this challenge. This book discusses an investigation into the use of Taguchi Parameter Design for optimizing Material removal rate and surface roughness generated by a Computer Numerical Controller (CNC) lathe. Control parameters being consider in this book are cutting speed, feed rate and depth of cut. After experimentally turning sample work piece using the selected orthogonal array and the parameters, this study expected produce an optimum combination of controlled parameter for the surface roughness. And from the result generated, the correlation for Material removal rate and surface roughness with the cutting parameters satisfies a reasonable degree of approximation.

Anbieter: Dodax AT
Stand: 27.01.2020
Zum Angebot